Wednesday, April 16, 2014

Pinwheel Table

My new old table!

It's spring break, one of the many perks of my amazing teaching job. Time to take care of house projects that I have been postponing. So, I decided that my vintage shabby chic dining room table is really only shabby, not too much chic going on there. Now that I am seeing the before picture, I am horrified that I thought it was okay to live with such a yucky piece of furniture, my bad!

One distressed mess!

This table was my big spring break house project, and it was a big project indeed. I used all zero VOC paints from Kelly-Moore so there was no stink, and I am hoping that means no toxic fumes as well. I started by priming the whole thing, then painted the legs green and the top white. I was not sure about how to get the stripes properly spaced so I just started with north, south, east and west, using a seamstress tape measure to measure around the periphery. I used blue tape for the stripes.



By the time I was ready to do the pink stripes, I had a better understanding of the math and the tape, and I was able to tape up all the pink stripes at once.


Note: I was not precise enough with the tape when it reached the center, so it is a bit sloppy. In addition, I would recommend waiting a day for the white paint to dry before laying down your tape, I ended up removing chunks of white paint and primer when I pulled off the tape, this also really mucked up the center. The blue taped also leaked quite a bit, so I went back in with a small flat paint brush to clean it up. The final step was 2 coats of polyureathane to protect it, because it's too darn pretty for me to let it get mucked up...


It's like eating dinner off of a huge candy. 




Luckily I have plenty of cute polka dotted bowls and vases that can sit in the center to hide the imperfections. I am learning to embrace imperfections anyways, to be okay with a bit of shabby, so long as there is a whole lot of chic...






Wednesday, April 2, 2014

Beaded Wire Wrapped Hoops


 I recently decided that copper is the new silver.  To prove my point, here is a quick tutorial on how to make basic copper bead wrapped hoops, and they are so cute, you won’t miss the silver at all. This is a common technique, but one that looks way more complicated than it is.  I'm sure you have seen bead wrapped earrings all over Pinterest, and like me, always thought they look pretty involved to make.  I am here to let you know, they are easy peasy...

I will walk you through the basic hoop like the ones below, then you should be able to come up with cool variations on your own. You can also study the other variations I came up with, and I allow you to copy them... :)



  Of course these would be incredible in silver, but copper is great as well, for many reasons. Copper is way more accessible than silver, you can get it at hardware stores, rather than specialty jewelry supply stores. Copper is very malleable, so if you don't have access to a torch for annealing,  annealing is not necessary with this technique. And of course, copper is super inexpensive compared to silver, although, the costs of all metals are rising. And copper really is beautiful, especially when it has been placed in a patina bath to darken and antique it.

Tools and Materials:

20 gauge copper wire,
24 gauge copper wire
ring mandrel or wood dowel, 1"
seed beads in a variety of sizes and colors
pliers: round nose, needle nose, flush cutters
needle files (optional)
Liver of Sulfur patina
pumice powder, or fine steel wool
ruler
Sharpie

Steps:

Cut 2 pieces of the 20 gauge copper 3.5" long. If you have files, file the ends flush. If you don't have files, make sure to have used the flush side of your cutters.
On your round nose pliers, mark a line with a Sharpie where you will be bending your loops so you have consistency with your loop sizes. See pic of where I marked mine.

Make small loops on each end of your wires.




Using  a ring mandrel or a dowel, curve the wires.

Use your needle nose pliers to rotate the loops so the holes are facing each other.



To wrap the hoop, cut 15" of your 24 gauge copper wire. Gather up seed beads that are all the same size. Whatever will fit through your wire is fine.

On your 24 gauge wire, make a bend with your round nose at 1/2". Using your fingers, begin wrapping the skinny wire down the bigger wire. Keep your wraps straight and tight. Wrap around 5 or 6 times.

Add one bead, and continue wrapping just like before. You may have to tweak the bead a bit to get it to lay how you want it to. Really try to get the wire taught. Wrap around 3 times before adding the next bead.

When you have reached the other end, finish by wrapping 6 times at the top to match the other side. Snip your wires and use your needle nose to tuck the wire ends flush with the coil.


For the ear wire, cut a piece of 20 gauge at 1.25". File ends. Make a small loop on one end. Curve it around your dowel. 

Make a bend on the other end with your needle nose, at just under 1/4"

Carefully open up the loop end to insert into one end of your hoop.






The last step is patina, and to me, it's where the magic happens. Place your earrings in a bath of Liver of Sulphur. This can be purchased at jewelry supply stores, and it is a must have for wire workers.

Let the earring go to very dark. Remove once it gets dark, don't allow it to sit there for too long.

Place a wet finger into your pumice powder and begin to rub off the patina. You want the patina to stay inside of the wrapped wire, and you want to have a contrast between clean and dark copper. Remove most of the patina from the ear wire.


Now that you know the basics, get creative and come up with your own designs, the possibilities are endless! If you have any questions, feel free to email me at: laurel@laurelnathanson.com or leave a comment here.
Happy wrapping!